2020 MITSUBISHI CANTER FG83 SINGLE CAB-CHASSIS 4X4

SPECIFICATIONS

• MODEL CAB TYPE:  WIDE
• LHD. FG83CE6LGSG
• ENGINE: 4 STROKE-CYCLE, WATER-COOLED DIRECT INJECTION DIESEL ENGINE
• ENGINE MODEL:  MITSUBISHI FUSO 4D33-6A
• NO. OF CYLINDERS 4 IN LINE
• PISTON DISPLANCEMENT 4.214 L (257.1 CU. IN.)
• MAX.OUTPUT*2 83KM(113 PS) (EC,NET)89 KM(120 PS)(JIS, GROSS) AT 3,200 RPM(53.3 R/S)
• MAX. TORQUE 304 N.M(31.0 KGF.M,224 LB.FT)(EC,NET JIS, GROSS)AT 1,600 RPM (26.6R/S)
• AIR CLEANER DRY PAPER ELEMENT
• ALTERNATOR 24 VOLT, 50 AMP.
• CLUTCH HYDRAULIC CONTRL, DIAPHRAGM SPRING, SINGLE DRY PLATE
• TRANSMISSION 5 FORWARD AND 1 REVERSE SPEED, WND TO 5TH SYNCHROMESH, 1 ST AND REV.CONSTANTMESH GEARS
• GEAR RATIOS 5.38-3.028-1.700-1.000-0722,REV.5.380
• TRANSFER 2 SPEED, CONSTANTMENSH GEARS
• GEAR RATIOS LOW: 1.987,HIGH:1.090
• FINAL REDUCTION GEAR (FRONT & REAR) SINGLE REDUCTION, HYPOID GEAR
• RATIO (FRONT & REAR) 6.166
• AXLE FRONT FULL FLOATING TYPE CONSTANT VELOCITY UNIVERSAL JOINTS
• REAR FULL FLOATING TYPE
• TIRE FRONT SINGLE, 7.50R16 119/117L
• REAR DUAL, 7.50R16 119/117L
• STEERING BALL-NUT TYPE WITH INTEGRAL TYPE HYDRAULIC POWER BOOSTER.TELESCOPIC AND TILT STEERING COLUMN WITH STEERING LOCK
• SUSPENSION SEMI-ELLIPTIC, LAMINATED LEAF SPRINGS
• SHOCK ABSORBERS HYDRAULIC DOUBLE ACTING TELESCOPIC TYPE ON FRONT AND REAR AXLES
• BRAKE SERVICE HYDRAULIC VACUUM SERVO ASSISTANCE, DUAL CIRCUIT
• PARKING INTERNAL EXPANDING TYPE ON PROPELLER SHAFT AT REAR OF TRANSFER
• EXHAUST VACCUM OPERATED, BUTTERLLY VALY TYPE
• FUEL TRANK CAPACITY 100 LIT. (DM3)22.0 IMP.GAL.OR 26.4 U.S. GAL)
• ELECTRICAL SYSTEM-BATTERIES 24 VOLT, REGULATED CONTROL-12 VOLT X 2,65 AH(234 KC)AT 20 HR RATE (65D23L)
• 52AH(187 KC) AT 5HR RATE (65D23L)
• CONSTRUCTION TILT TYPE WITH TORSION BAR, ALL STEEL WELDED CONSTRUCTION(FIXED CAB FOR FG83CE6WLGSG)
• WHEELBASE MM/INCHES:  3,460(136.2)
• OVERALL LENGTH MM/INCHES:  6,12(240.9)
• OVERALL WIDTH MM/INCHES:  2,035(80.1)
• OVERALL HEIGHT MM/INCHES: 2435(95.9)
• TREAD FRONT MM/INCHES:  1,665(65.6)
• REAR MM/INCHES:  1,560(61.4)
• GROUND CLEARANCE MM/INCHES: APPROX. 210(8.3)
• CAB TO REAR AXLEMM/INCHES:  2,920(115.0)
• CAB TO END OF FRAME MM/INCHES: 4,395(173.0)
• FRAME WIDTH MM/INCHES:  750(29.5)
• FRONT OVERHANG MM/INCHES:  1,130(44.5)
• REAR OVERHANG MM/INCHES:  1,475(58.1)
• KERB WEIGHT KGS/LBS: 1 2,515(5.545)
• MAX.G.V.W. KGS/LBS:  5,500(12,125)
• MAX. SPEED KM/H(MPH):  105(65.2)
• MAX. GRADEABILITY (TAN 0)% 60.0
• MIN. TURNING RADIUS M (FT) 6.8(22.3)